EA7JYR escribió:Alguien sabria resetear la yaesu ft 900 por completo?
Mucha fracias de antemano
A ver si esto te ayuda.
ft-900
« Reply #2 on: March 30, 2007, 06:23:54 PM »
To do a system reset [ SOFT RESET ]on the FT-900 from it's original setup and factory default,hold down both the (UP + DOWN )buttons while turning on the power up button.To do a [ HARD RESET ],turn the transceiver OFF,and then turn the BACKUP switch [ OFF ],(turn the radio over to the bottom side and you'll see a hole with the front center of the face panel.Let the transceiver sit for several minutes.Turn the transceiver [ ON ],then turn the BACKUP switch( ON )[after the transceiver has been turned ON].This info was from the Yasea Service Manual,hope this will help you get back on the air. Carl W2WRX........