retear ft 900

Montajes y experimentos para todos los públicos.

retear ft 900

Notapor EA7JYR » 2019-12-28 17:36

Alguien sabria resetear la yaesu ft 900 por completo?
Mucha fracias de antemano
EA7JYR
 
Mensajes: 12
Registrado: 2016-05-25 13:08

Re: retear ft 900

Notapor ECB20ACO » 2020-01-15 15:02

EA7JYR escribió:Alguien sabria resetear la yaesu ft 900 por completo?
Mucha fracias de antemano


A ver si esto te ayuda.


ft-900
« Reply #2 on: March 30, 2007, 06:23:54 PM »
To do a system reset [ SOFT RESET ]on the FT-900 from it's original setup and factory default,hold down both the (UP + DOWN )buttons while turning on the power up button.To do a [ HARD RESET ],turn the transceiver OFF,and then turn the BACKUP switch [ OFF ],(turn the radio over to the bottom side and you'll see a hole with the front center of the face panel.Let the transceiver sit for several minutes.Turn the transceiver [ ON ],then turn the BACKUP switch( ON )[after the transceiver has been turned ON].This info was from the Yasea Service Manual,hope this will help you get back on the air. Carl W2WRX........
ECB20ACO
 
Mensajes: 6
Registrado: 2015-10-22 16:33

Re: retear ft 900

Notapor EA7JYR » 2020-01-15 19:15

Gracias por la informacion, no ha funcionado, lo que le pasa es que esta el display intermitente y pense con un reseteo completo pudiera solucionar el problema, pero no ha sido asi.
De todas formas, muchas gracias por la informacion.

73´s
EA7JYR
 
Mensajes: 12
Registrado: 2016-05-25 13:08


Volver a Cacharreo

¿Quién está conectado?

Usuarios navegando por este Foro: No hay usuarios registrados visitando el Foro y 9 invitados

cron